Banks-power Dodge Trucks: (Diesel ’07 - 12 6.7L Cummins) Intak Bedienungsanleitung

Banks Techni-Cooler®Charge Air Cooler Assembly 07-08 Dodge 6.7L Cummins (24-valve) ISB Pickup Trucks USE WITH SYSTEM P/N 25983Gale Banks Engineering

Figure 8 Orientation of the Hose Clamps on the driver side.10 96787 v.4.0

96787 v.4.0 11Notes

Gale Banks Engineering 546 Duggan Avenue • Azusa, CA 91702 (626) 969-9600 • Fax (626) 334-1743Product Information & Sales: (800) 438-7693bankspowe

Dear Customer,If you have any questions concerning the installation of your Banks Techni-Cooler, please call our Technical Service Hotline at (888) 83

Banks Ram-Air Intake System(P/N 42175, 42178)- Increases your airflow over stock. - Adds power, improves fuel economy, lowers EGTs and reduces smoke.B

4 96787 v.4.0Figure 1 A/C condenser with round end tanksNon-Compatible A/C CondenserThis System is not compatible with the A/C condenser that has th

1. Disconnect the negative battery cables from both batteries2. Disconnect the Inlet Air Temperature/ Pressure Sensor connector located on the air box

Figure 3 Upper Radiator Cross Brace11. Remove the hex head bolts that attach the lower two A/C condenser mounting brackets to the CAC. Remove the torx

shown in Figure 4. Place the A/C condenser back in front of the Techni-Cooler and assemble the condenser to the banks intercooler using the 5⁄16” bolt

Figure 5 A/C Condenser Removal Procedure Figure 6 A/C Condenser Removal Procedure8 96787 v.4.0

diameter hose all the way onto the boost tube. Install the boost tube in the vehicle, make the attachment to the turbocharger, then slide the 3.5 inch