1/26/09 PN 96492 v.5.0Banks Ram-Air® Super-Scoop® 2003-07 Chevy/GMC 6.6L Duramax Turbo-Diesel Pickups THIS MANUAL IS FOR USE WITH KITS 42168 AND 42
10 96492 v.5.011. Position the fender well liner into the wheel well. Attach the previously removed wire harness to the fender well liner. Install t
96492 v.5.0 11Notes
Gale Banks Engineering 546 Duggan Avenue • Azusa, CA 91702 (626) 969-9600 • Fax (626) 334-1743Product Information & Sales: (888) 635-4565bankspowe
Dear Customer,If you have any questions concerning the installation of your Banks Ram-Air Super Scoop, please call our Technical Service Hotline a
Tools Required: • 3⁄8” drive ratchets with metric sockets• Standard and Phillips head screwdrivers• Standard and needle-nose pliers• Clean shop towels
1234568956558* Replace when nylon insert is worn.** Replace when split lock washer is worn or flat.7****7**Figure 1Section 1GENERAL ASSEMBLY4 96492
Item Description Part# Qty 1 SUPER-SCOOP, RAM-AIR SYSTEM, CHEVY, 6.6L DURAMAX, ‘03-’07 42160 1 SUPER-SCOOP, RAM-AIR SYSTEM, GMC, 6.6L D
NOTE: Before installing the Banks Super-Scoop make sure to have a completely installed Banks Ram-Air Intake System in your vehicle. 1. Remove all plas
Figure 3Figure 496492 v.5.0 7
Figure 5 Provide A/C line clearance if necessary.Figure 68 96492 v.5.0
the Stud Plate and Bracket with the supplied nylock nuts and washers to the inner fender. See Figure 7. Do not reuse the nylock nuts if the nylon inse
Kommentare zu diesen Handbüchern